lordasgart.github.io

PrusaSlicer settings for the Geeetech Prusa i3 Pro

A while ago I wanted to get started with 3D printing, so my wife bought me a simple DIY 3D printing kit from the chinese company Geeetech. So after assembling the whole thing together with my son, and the first try and errors with the Easy Print 3D software from Geeetech and weeks of printing with Cura 3D, I wanted to get PrusaSlicer to work because of some features I like there a lot, for example to print a brim and a skirt and so on. So after researching the Internet for a while, a reading the builtin settings from the printer from the display and via G-Codes I disovered the following settings are working fine for my Geeetech Prusa i3 Pro W but I think for every other Geeetech Prusa i3 variant too. So I wanted to share them, and here they are (mostly only the settings different from the default values of PrusaSlicer 2.2.0)

Printer Settings

Geeetech Prusa I3 Pro W

General

180,225,200

Firmware

Custom G-code

Start G-code

G28 ;Home
G1 Z15.0 F6000 ;Move the platform down 15mm
G92 E0
G1 F200 E3
G92 E0

End G-code

M104 S0;Cooling the heat end
M140 S0;Cooling the heat bed
G92 E1
G1 E-1 F300
G28 X0 Y0;Home X axis and Y axis
M84

Machine limits

Maximum feedrates

Maximum accelerations

Jerk limits

Minimum feedrates

Extruder 1

Size

Layer height limits

Retraction

Layers and perimeters

Layer height: 0.2,0.3

Horizontal shells

5,3 0,0

Infill

Speed

Speed for print moves

30,10,50%,30,15,10,30,100%,60,10

Speed for non-print moves

80

Modifiers

10

Auto Speed

20,0

Speed for print moves

45,15,50%,60,20,15,30,100%,60,20

Speed for non-print moves

90

Modifiers

15